Global Flat Rate Shipping 6 USD

Helps balance front weight and Improves strap comfort

Quest Pro Counter Weight Wrap

$28.00Regular Price$18.95Sale Price

1/24

Instructions

The Quest Pro Counter Weight Wrap has been specifically designed to fit the back of the Quest head strap. It works by adding a soft padded layer to the hard plastic strap while the added weight helps counter front heaviness.

This mod works great on it's own. For best results we highly recommend using it with our Quest Deluxe top strap LINK
 

These instructions are only a guide. You can try experimenting different counterweight options to suit you needs. Batteries, coins and bolts are a good example. A small power bank is also a good option to help extend battery life

Contents.jpg

Included in this pack: 

1x Counter Weight Wrap

1x Strap liner

6x Hook Velcro Tabs

1x Hook Velcro Double Sided Strip

20190712_151315.jpg

Start by applying the provided hook Velcro tabs to the back of your Quest strap. Be sure to wipe the strap clean and remove and oily residue before application. We supply an extra set of tabs if needed

.jpg
20190712_151628.jpg

Carefully press the strap liner onto the hook Velcro. Work your way from the middle outwards keeping the liner pad well balanced top and bottom

.jpg
20190712_152052.jpg

(Optional step)

Place the strip of double sided hook Velcro on the end opposite to the stitched Velcro and logo

.jpg

Feed the counterweight wrap logo end first through the back opening of the quest strap. With the palm of your hand carefully press the end of the counter weight wrap onto the strap liner

.jpg
.jpg

Tape together a pack of 4 x AA batteries and place them on the other side of the Quest strap. These will hold tight once wrapped. You can also try using coins/ bolts etc.

Anker Astro E1 6700

3.8in (96mm) x 1.7 (43mm) x .09 (2.3mm)  4.2oz/120g

.jpg

Anker PowerCore 5000

4.2in (106mm) x 1.3 (33mm) x 1.3  4.8oz / 136g

.jpg

You can also use a power bank as a counterweight. We recommend a small to medium size pack. Lager power banks will fit but may hang down a little

.jpg

Carefully pull the wrap around the batteries and back over the starting point

20190712_152709.jpg
20190712_152650.jpg

Fold the wrap back over itself through the opening  to form a twin layer of padding on the inside of the quest strap

.jpg
.jpg

Hook the end of the wrap back onto itself and squeeze tight. If the pack is loose try wrapping it again

.jpg
.jpg

Depending on head shape you may want to try fitting the wrap in different configurations with one / two layers on the inside

.jpg

From testing we believe 4 x AA batteries is a suitable counter weight to help lift the front of the headset however because ergonomics are subjective for each user we recommend experimenting with different weight configurations yourself to find the best fit. Just be careful not to damage the Quest strap from overloading

.jpg

For Best results we highly recommend using this counterweight kit in combination with our Quest Deluxe Top Strap (not included in this kit)

 

More Info on the Quest Deluxe Strap here LINK